Many have heard of a weighted blanket; some even know their use by occupational therapists and other health professionals as a deep pressure methodology to assist patients with anxiety or sensory disorders, and those on the autism spectrum. You can find these online in both small boutiqes and big box shops, ranging from 2 pounds and 24″ square (at about a $100 price point) to a king-size version at about 30 pounts to up to $500. Last December a friend asked me to make one for her child; we selected two flannels the child liked, and purchased pellets, and she graciously let me hold onto the finished result long enough to write this tutorial up!
Making one of these blankets is slightly easier than a comforter. There were a handful of tutorials online but I thought I’d provide my own flavor, making it similar to a quilt with a bound edge (as opposed to a turned-and-sewn envelope-style comforter). Making your own will cost about 40% of what it would cost to purchase one; you can also buy the exact fabrics you like, and the method I’m showing here uses the prettiness and precision of traditional quilt binding, and very exact channels.
For a baby size blanket, roughly 36″ by 48″:
1 3/4 yards each of flannel (43″)
4 pounds pellets
1/4 yard quilting cotton (43″) for binding
For those who enjoy a summary, here it is:
We are going to mark all our channel lines first. Then we will affix the two layers wrong-sides together, and sewing along three edges with 1/4″ seam allowance, leaving one long edge open. We will then sew all our vertical channels, and fill each chamber one by one – sewing the next horizontal channel line after each row is filled. Then we’ll bind the quilt, and be done! Below is a diagram (click on it to enlarge):
Prewash all fabrics; cut your flannels to the exact size; in this case, 36″ by 48″. Keep in mind if you use a flannel like I did, it might shrink quite a bit. This is why although fabrics are 44″ wide, I have provided a conservatively-size quilt:
You can barely see the lines, but that’s okay! They only need to last, and be seen, for a short time. Obviously, don’t handle the quilt a lot or let your cat sleep on it, while you’re putting it together!
Pellet time! Already!
So, it is important each channel has the same amount of pellets. This is quite easy to accomplish, but depends on the total weight of your pellets. You can divide your pellets by weight, or in my case, by volume. At four pounds, it turned out this corresponded to 1/4 cup pellet per chamber.
But there’s a little more to it than that. It’s easy (especially when working by volumes) to use too little or two much per scoop. I found it advantageous to first separate the entitreity of the pellets into the eight vertical sections. As I worked with each, I would then split each one of these volumes into six, working with one vertical section at a time. This made sure I didn’t end up short, or with too much pelletude at the end of the project!
For each chamber volume, I used my pimento jar supply. I make a LOT of vegan nacho cheese so I have a billion of these pimento jars. Have I shared my nacho cheese recipe with y’all yet? Don’t worry. I will.
Okay! Time to sew up those vertical chamber lines. Use a walking foot if you have one. Flannel is lovely as it all holds together beautifully while you sew:
Once you have your vertical chambers, it is time to fill them! This is kind of a soothing process. Make sure when you pour the pellets into each section, to insert your arm and gently make sure each pellet settles into the lowest chamber. Flannel especially will try to “grab” pellets’. Don’t worry; this obviously gets easier as you move up the quilt.
After each row is finished, carefully stitch it closed! I say “carefully” as you want to make sure not to strike a pellet with your needle, as you sew.That would probably make a loud, unpleasant noise. I don’t know, because I was careful! By the time you get to the penultimate row, the pellets are close enough to the open edge they may try to spill out – so take care putting the quilt on the machine. After you’ve finished all the chambers, go ahead and stitch the quilt closed!
Binding time! I use the same exact methodology as this utorial, posted on Sewn Into The Fabric. I first cut my strips (2 1/4″), piece, and press them wrong-sides together:
Fold the binding strip completely perpendicular to itself:
Wow – December is already here! I hope, if you celebrate the holiday, that you are finding peace and serenity during what can be a very intense time of year! I know it can be difficult to sew for yourself this time of year. If you are joining me here to make yourself a holiday dress, a daywear dress, or just something special – good for you!
If you are here to make the dress as a gift – good for you, too! The sample dress I’m showing here, is going to be pressed and off to a friend just before Hanukkah. I hope she likes it!
So – who’s pumped to get started?
First of all, thank you, stitchers. Thank you for your emails and texts, and your very helpful feedback – like Kristine, who posted a bit about Bootstrap 8 1/2″ by 11″ assembly (thank you, Kristine!). Remember, I am here to help you if you get stuck!
So there’s no time like the present, to get started! Am I right?